Supply voltage
12-30 VDC (5 VDC optional)
FGH 8
12-30 VDC (5 VDC optional)
HTL or TTL
600, 720, 750, 1000, 1024, 1200, 2048, 2560, 2800, 4096
0° track (others: see device options)
Hollow shaft: up to 3000 rpm (up to 1200 rpm with IP66) / max. 100 kHz
Hollow shaft: up to Ø 80 mm with feather key
-25 °C to +85 °C
up to IP66
approx. 13 kg
Take a look at our animations for the steel, crane and port technology, and mining sectors! Click through our animations from a rough overview to the specific mounting location of an encoder and get direct suggestions for suitable encoder solutions.
The optical rotary encoders FGH 8 with a through hollow shaft up to Ø 80 mm are suited for speed monitoring and speed measurement under severe environmental conditions. Thanks to their flat design, they are ideal for attaching additional sensors such as speed switches, absolute encoders or a combination of these. In addition, there is the possibility of a redundant design with two identical scanning systems and evaluation electronics.
The optical rotary encoders are attached directly onto the application shaft or to the application shaft by using a suitable adapter flange.
FGH 8: optical rotary encoders with hollow shaft up to 80 mm
The optical rotary encoders of the FGH 8 series offer a long service life and a very high level of reliability – even under severe ambient conditions.
The modern electronics of the optical rotary encoders are characterized by electromagnetic compatibility (EMC). It is embedded in a robust, thick-walled housing.
The optical rotary encoders of the FGH 8 series offer a wide variety of device and signal options and can be supplemented by attaching up to 3 further encoders.
The optical rotary encoders of the FGH 8 series are suitable for mounting locations with limited space. Engineering support and mechanical accessories ensure safe installation.
We look forward to your challenges.
