FG 41 SIL 3 / FGH 41 SIL 3

Incremental encoders

  • Hollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot attachment)
  • Certified for safety applications up to SIL 3 / PL e
  • High signal quality, HTL, TTL, sin/cos, up to 4096 pulses
  • Options: safety certified solid or hollow shaft attachment
Incremental encoders
Online-Request Contact

Robust solutions with safety certification

The extremely rugged incremental encoders FG 41 (solid shaft) / FGH 41 (hollow shaft) are specifically designed for safety applications in heavy industry. The SIL certified series offers a high level of safety up to SIL 2 / PL d (position oriented) and SIL 3 / PL e (speed oriented). The encoders are highly resistant to shock and vibration loads, with degree of protection up to IP67. Day offer a high signal quality (HTL, TTL, Sin/Cos) up to 4096 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as in wet areas in rolling mills or sea air.

Technical Data

AttributeValue
Supply voltage

12-30 VDC

Signal amplitude
  • HTL or TTL
  • Sin/Cos
Pulse rate

1024, 2048, 4096

Output signals

0°, 90° and inverted signals,
Reference pulse (N) without SIL / PL, with inverted signal

Maximum frequency
  • Solid shaft: up to 4000 rpm / HTL and TTL: 100 kHz; Sin/Cos: 500 kHz
  • Hollow shaft: up to 3000 rpm / HTL and TTL: 100 kHz; Sin/Cos 500 kHz
Electrical connection
  • Terminal strip in a terminal box
  • Fixed cable
  • 12-pole round connector M23
Construction type / Ø shafts
  • Solid shaft (B5 / B35): Ø 11 mm or Ø 14 mm
  • Hollow shaft: Ø 20 mm with keyway (for shafts up to max. length: 48 mm)

Device temperature range

-40 °C to +85 °C

Degree of protection

up to IP66 / IP67

Weight

Approx. 3.0 kg

Device options
Mechanical options
  • Additional foot (solid shaft, construction type B35 only)
Special features and certificates
  • For speed oriented safety functions: SIL 3 (DIN EN 61508); PL e / category 3 (DIN EN ISO 13849)
  • For position oriented safety functions: SIL 2 (DIN EN 61508); PL d / category 3 (DIN EN ISO 13849)
  • Suitable for wet areas in rolling mills
  • Saltwater-proof

News

Contact

We look forward to taking on your challenges.

Sales

Newsletter
Information about privacy concerns can be found in our Privacy Policy