Pulse converters

Pulse converters

OM 3-1 pulse converters are utilized for electrical isolation, signal level conversion and eliminate interference signals. Optocouplers isolate the inputs from the outputs. The output stages are equipped with the latest driver ICs, and enable signal transmissions along long lengths of cables in conjunction with high output frequencies. Short-circuits and output stage overload are signalled. It is possible to snap the 50 x 75 x 52 mm (W x H x D) module onto EN 50 022 standard mounting rails.

 

Type

OM 3-1

Casing

Electronic casing for standard mounting rails

Supply voltage

12 - 30 VDC

Signal input

HTL (square wave 12 - 30 V) or TTL (square wave 2.8 - 6 V)

Input current

approx. 6 mA (24 VDC)

Signal output

HTL (approx. supply voltage) or TTL (5 V to RS 422A)

No-load current consumption

approx. 30 mA (24 VDC)

Frequency range

0 - 250 kHz

Dimensions (W x H x D)

50 x 75 x 52 mm

Degree of protection

IP20

Device temperature range

-20 °C to +70 °C

Type

Input/output

Supply voltage

OM 3-1-1

HTL/HTL

12 - 30 V

OM 3-1-2

TTL/HTL

12 - 30 V

OM 3-1-3

HTL/TTL

5 V

OM 3-1-4

TTL/TTL

5 V

OM 3-1-5

HTL/TTL

12 - 30 V

OM 3-1-6

TTL/TTL

12 - 30 V

Data sheet (PDF, 393 KB) Download

Note

Standard dimension drawings and connection diagrams are provided in the Operating and Installation Instructions. We would be pleased to send you individual variations as well as DXF/STEP files on request.