The controller modules of the U-ONE(-SAFETY) second generation monitor the status of the entire universal encoder system. The parameterization is carried out using input masks, meaning that complex SPS programming is not necessary. A digital preset input enables the system to be quickly activated and set. The controller module is also optionally available with an additional incremental output for the speed measurement, current output for real-time data, and is certified up to SIL 2 / PL d.
Technical Data
Attribute
Value
Supply voltage
12-30 VDC
Signal outputs/Interfaces
USB 2.0 interface: Adjustable parameters
LED indicators: Operating conditions/warning
Optional (without SIL / PL): Incremental output (HTL) and current output (4 … 20 mA)
Electrical connection
1 x ST connectors FOC (50/125 µm or 62.5/125 µm)
Number of screw terminals and function:
2: Supply voltage (+, -)
2: Reset (CH 1, CH 2)
2: Preset (CH 1, CH 2)
2: Status (CH 1, CH 2)
2: Error (CH 1, CH 2)
4: Option incremental output (0°, 90°, each inverted)
2: Option current output (4…20 mA)
USB 2.0 programming interface
Mount on DIN rails to EN 50022 with height of 35 mm (Exchange without disassembly of all modules)
Dimensions
100 x 25 x 110 mm (modular electronics housing for DIN rail bus connector)
Device temperature range
-25 °C to +60 °C
Degree of protection
IP20 (switchboard installation)
Device options
Combines with other modules belonging to the U-ONE(-SAFETY)-LWL-System
Additional options (without SIL / PL):
Real-time data: Current output 4 … 20 mA, configurable for speed and position
